Official Luthiers Forum! • View topic

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours

Forum rules

Same rules apply to all forums at the Luthiers Forum.

tenor string distance

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

mikemcnerney

Post subject: tenor string distance

Posted: Thu Jan 21, 2016 3:10 pm

Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 514
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur

What is a recommended 1st string distance from FB edge to string center?
I think I mad my neck too wide where it meets the body & so things are getting kind of far apart.
So I am considering bringing the 4th string out of parallel with the neck thus I bring them all a little closer????
idunno

_________________
Mike McNerney

Top

profchris

Post subject: Re: tenor string distance

Posted: Fri Jan 22, 2016 4:38 am

Cocobolo

Joined: Thu Feb 09, 2012 4:10 pm
Posts: 279
First name: Chris
Last Name: Reed
City: Stowmarket
State: Suffolk
Zip/Postal Code: IP14 2EX
Country: UK
Focus: Build
Status: Amateur

That would look odd to me. And anyway, I like the distance from fretboard edge to increase as I go up the neck because it makes playing easier (for me). Nylon strings are soft and easy to pull off the fretboard edge.

I'd centre the strings on the neck. Playability is more important than looks. I space at 9 to 9.5mm at the nut, 13mm at the bridge, but you should space them to suit your playing preferences.

Fortunately there is no "right" way to style a ukulele!

Top

Quine

Post subject: Re: tenor string distance

Posted: Fri Jan 22, 2016 1:02 pm

Koa

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur

I make mine 1/8" from the edge to the edge of the string at the nut. At the 12th fret its about 5/32
How wide is your nut? Most ukes are about 1-3/8" wide at the nut, and string spacing about 1-5/8" at the bridge Can you shave the neck down some?

Top

ernie

Post subject: Re: tenor string distance

Posted: Fri Jan 22, 2016 6:35 pm

Brazilian Rosewood

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional

I use the stew -mac string fret calculator. I also use 1/8in from the nut to 1 and 4 th string

Top

mikemcnerney

Post subject: Re: tenor string distance

Posted: Mon Jan 25, 2016 5:10 pm

Koa

Thanks everyone. It looks like all my measure are better than I realized.
Bridges positioned, wholes drilled & ready to start finishing.

_________________
Mike McNerney

Top

unkabob

Post subject: Re: tenor string distance

Posted: Mon Jan 25, 2016 10:34 pm

Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur

I wish that I could move forward on a project that quickly.
Good luck.

Bob :ugeek:

Top

Page 1 of 1

[ 6 posts ]

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: